Decarbonising industrial heat

Do I need a grid connection upgrade to electrify my boiler?

If you install a direct electric boiler, usually yes. With thermal storage, the upgrade can often be avoided.

A direct electric boiler draws power at the moment steam is needed, so your import capacity has to cover your peak steam demand. For most process sites that peak is well above the existing connection, and a connection upgrade is what stalls many electrification projects: the cost can be comparable to the boiler itself, the lead time can run to years, and a new substation or transformer compound may need planning consent of its own.

Thermal storage changes the arithmetic. Heat is charged into the store over several hours, so the import capacity is sized to your average load rather than your peak, and the store covers the peaks. The Caldera Storage Boiler's controls charge only within the headroom your connection has available, so many sites can begin within their existing connection and avoid the upgrade entirely. Transformers, switchgear and capacity charges are all sized to the same, lower figure. In practice this is what makes the first step affordable: the Storage Boiler connects to your existing steam header and your existing electrical supply, with no new infrastructure built around it.

Whether this applies at your site depends on your demand profile and your existing import capacity. That is what the site modelling establishes, and it is the first thing to find out.

Get in touch

Whether you are interested in a site suitability assessment, partnering, or anything else, we look forward to hearing from you.

Contact us