Decarbonising industrial heat

How do I decarbonise process heat?

Start with the load you can move, not the whole site. Industrial process heat below about 200°C (which covers most food, beverage, pharmaceutical, chemical and paper processes) is usually made by gas boilers. A gas boiler is typically 80 to 90% efficient when new and running at full load, and often less in practice because of flue losses and short cycling. There are five realistic routes to decarbonising this heat, and most sites end up implementing a combination of them in a hybrid approach.

Heat pumps. Highly efficient for producing hot water and steady baseload heat, especially where there is waste heat to lift. The limitations are that efficiency falls as the temperature lift rises, and sizing a heat pump for peak steam demand makes it very large and the capital cost prohibitive.

Direct electric or electrode boilers. Simple and proven, but they draw electricity exactly when steam is needed. This means that the grid connection, transformers and capacity charges are all sized to peak demand. For sites that are mostly or fully electrified, there is also no opportunity to earn flexibility revenues.

Electric boilers with integrated thermal storage. Electricity is bought when it is cheap, which is usually also when it is greenest (because this is when there are surplus renewables on the grid), stored as heat, and released as steam on demand. This means the grid connection can be sized to the average load, while peaks in steam demand are covered from the store. As a result, the asset can also earn from grid flexibility. The Caldera Storage Boiler is one example, delivering saturated steam up to 16 barg on demand.

Hydrogen and biomethane. Existing boilers can be converted to burn hydrogen or biomethane, but the supply and price of these fuels are not yet established for most sites.

Biomass. Only works where a site can burn its own waste; otherwise fuel logistics and emissions limits apply.

A practical sequence: begin by electrifying the easiest 20 to 40% of heat you can move to off-peak prices using a storage boiler, heat pump or other solution, then add capacity as the economics strengthen and more incentives become available. Three numbers decide the case: the cost of the grid connection upgrade, the price you pay for power, and whether any subsidies or flexibility revenues apply.

Get in touch

Whether you are interested in a site suitability assessment, partnering, or anything else, we look forward to hearing from you.

Contact us