How does a Storage Boiler fit alongside the gas boilers, heat pumps or CHP a factory already has?
The Storage Boiler runs alongside your existing plant, connected to the same steam header, and you decide how much of the load it carries. It is designed to be retrofitted alongside your existing boilers or to replace them, depending on the site economics and the share of heat you want to electrify.
With gas boilers, it is currently most economical to electrify 20 to 40% of the heat with the Caldera Storage Boiler, taking advantage of off-peak electricity rates. The gas boilers continue to carry the remainder and provide backup. As the economics improve, you turn the gas boilers down further and add Heat Cells to scale up the Storage Boiler.
With a heat pump, the heat pump is sized to cover the steady baseload and hot water duties, where its efficiency is highest, and the Caldera Storage Boiler covers steam up to 16 barg and the peaks in demand. Heat pumps cost more per MW of output than thermal storage, so covering the peaks from the store rather than from a larger heat pump lowers the overall project cost.
With CHP, the most efficient arrangement is to run the engine at full load and let the store cover demand beyond the CHP's output.
In every case the site keeps its existing plant. For the facility or operations manager responsible for the steam system, that is usually the main reassurance: the first step in decarbonising does not put production at risk.
