How does the Caldera Storage Boiler work?
The Caldera Storage Boiler is an electric boiler with thermal storage built in. It charges with electricity when power is cheap (often when there is surplus renewable generation on the grid), stores that energy as heat, and raises steam when your process needs it. The process has four stages.
Charging. Electrical heating elements embedded in solid aluminium-composite blocks heat them to 500°C. Charging can be modulated from 0 to 100% and responds in under a second, so it can follow an electricity price signal or a grid balancing instruction. A full charge from empty takes about 2.5 hours, and the store can raise steam before it is full.
Storing. The blocks sit inside a double-walled, vacuum-insulated vessel called a Heat Cell, which works like a vacuum flask. The Heat Cell uses best in class thermal insulation: standing heat loss is only 8 kW per Heat Cell, about 3.6% of a full charge per day, so the store holds its charge for days rather than hours.
Dispatching. Treated feedwater is pumped through coils embedded in the hot blocks and leaves as steam, which flows directly into your existing steam header at up to 16 barg. Steam output responds to a change in demand in under 60 seconds. Charging and dispatching are independent, so the store can take in electricity while it is raising steam.
Running alongside existing plant. The system follows your steam header pressure automatically and runs unattended. Your existing boilers remain in place for backup, or to carry the balance of the load.
Because charging and steam production are decoupled, the grid connection is sized to your average load rather than your peak.
