What is thermal energy storage for industrial heat, and why does it matter?
Thermal energy storage stores heat so that it can be used later. It is done by using electricity to heat a solid or liquid medium, such as aluminium-composite blocks, molten salt, graphite, steel or pressurised water, and holding the energy as heat. In an industrial setting, this means buying electricity when it is cheap (often when there is surplus renewable generation on the grid), storing it as heat, and releasing it as steam or hot water when the process needs it.
Industrial heat is one of the hardest parts of the energy system to decarbonise, and producing it accounts for over 20% of global greenhouse gas emissions. It spans a wide range of temperatures. Above about 400°C, in cement, glass and steel, the options are few and still developing. Below 200°C, which is the steam and hot water used in food, beverage, pharmaceutical, chemical and paper processes, the technology to electrify exists today, and that is the band this page is about. Most of that heat comes from gas boilers. The obvious replacement, a direct electric boiler, needs a grid connection sized to the site's peak steam demand. That connection upgrade, and the transformers and capacity charges that come with it, can cost as much as the boiler itself and can make the project unaffordable.
Thermal storage is the affordable answer to this, because it separates the time electricity is bought from the time heat is used. A site can charge overnight, or when wind and solar push prices down, and then raise steam through the day from the stored heat. The grid connection is therefore sized to the site's average load rather than its peak. The Caldera Storage Boiler is an industrial example of this for processes using heat below 200°C: an electric boiler with thermal storage built in, delivering saturated steam up to 16 barg.
